· The aluminum V-shaped hull is made of marine aluminum 5083 with powder coating RAL 9016 (white) and passivation protective treatment according to the ENVIROX system, which allows the boat to be used in aggressive marine environments and high temperatures;
· GALA TABS – a special patented hull design that provides for the expansion of the transom and reinforcement with transom brackets;
· Aluminum steering console with windshield, railing, front seat and backrest;
· Aluminum driver’s seat with folding backrest, handrails and storage niche;
· The aft part of the boat with a recess, a soft folding seat and a spacious box;
· Mechanical steering system, including a steering cable, gearbox and steering wheel;
· Built-in ventilated bow locker with a non-slip coating;
· Soft cushion on the bow locker;
· All seats, cushions and backrests on the boat are made using SILVERTEX® materials;
· External plastic transom cover for motor installation;
· A set of zinc anodes for additional corrosion protection of the hull;
· Two aluminum drainage fittings with a stopper and membrane;
· Non-slip deck coating for easy and safe movement around the cockpit;
· Three towing points and four lifting points;
· Molded mooring eyebolt in the bow;
· Bow handle made of molded PVC;
· Five-chamber inflatable U-shaped tubes made of PVC or Hypalon material;
· Overpressure valve;
· Plugs for the inflatable tube made of molded PVC;
· Decorative covers for the tubes with handles and logo;
· Bottom beam with a water deflector;
· Bottom bar made of molded PVC to protect the keel;
· A set of oars;
· High efficiency foot pump;
· Repair kit and user manual.

· Change the color of the tube;
· Color change for the aluminum hull of the RIB;
· Replacement of the deck coating with EVA Marine Deck;
· Replacing the PVC material of the tube with a fabric of higher density – 1450 g/m2;
· Additional protection of the tube with a bottom bar made of molded PVC;
· Parking awning;
· Cover for the steering console;
· Seat cover;
· Electrical kit, which includes key rocker switches, navigation lights, running lights, horn, bilge pump, battery switch, battery box;
· Fiberglass bow platform with mooring eyebolt, soft backrest and bow roller;
· Onboard fiberglass platforms with non-slip coating;
· Installation of EVA Marine Deck coating on the onboard platforms;
· Fuel system with 83L aluminum tank, integrated fuel level gauge, filler neck and fuel hoses;
· Additional overpressure valves;
· Additional bow towing units;
· Towing arch with two aluminum mooring lines and a towing hook;
· Soft cushion with a plywood base – SUNDECK, which is installed between the bow locker and the steering console.
· Aluminum T-top awning (canopy) with a mounting plate for installing equipment.